Many Projects - One Warp

Warping the loom is the part of weaving that I like the least. One of the things I love best about weaving is planning projects and identifying as many projects as possible from a single warp using different weft or different treadlings. Because of this, my recent projects involve putting a 6-7 yard warp on the loom and working on a number of projects.  I recently put on a 7 yard warp of two colors of 8/4 cotton rug yarn, planning to make fabric for a couple of rag rug bags and maybe some placemats.

I ended up making fabric for two bags and not making any placemats.  The bags are lined with fabric and one has cotton webbing straps and the other uses leather belts for handles. The finished size of the bags are 15" X 17" tall.







Fabric to cover the pillow on my weaving bench.

A small rag rug

3 small bags.  More on these bags in a separate post.

Date Finished  October 2013

Loom  Newcomb

Weave Structure  Plain Weave, log cabin thick and thin

Reed  12 epi

Warp     Fiber  Cotton

              Count  8/4

              Color Dusty Rose and Eggplant

              Mfr  Maysville

              Source  Earthguild

Warp     Width in Reed  20"

              Ends  240

              Length  7 yds

Weft      Fiber  blue flowered cotton rags cut in 1 1/2 inch strips and carpet warp alternating

              Count 6 ppi - 3 rags, 3 carpet warp

              Color

              Mfr

              Source  Old Curtains

Beat                       50/50                     

Size

Notes

Huck Lace Bamboo Shawl

Handwoven recently published a pattern for making a shawl with Aunt Lydia's Bamboo.  The big benefit of this yarn is that it is readily available at Michael's and Joann's and many other local craft stores and it is cheap, under $3 per 300 yd ball of yarn.  I purchased 9 balls of white bamboo, hoping to weave two shawls on a single warp.  The bamboo has a wonderful silky feel, however that results in several issues.  The first is that it is hard to beat consistently, because the weft has a tendency to pack down too easily.  The second issue also relates to it's slipperiness.  Even after wet finishing, the warp and weft have a tendency to move around.  This is exacerbated by the Huck Lace weave, which has some longer floats.  And lastly, since the yarn did pack down more than I wanted, I ended up using more in the weft than I had planned.  So when it was time to weave the second shawl, I did not have sufficient white bamboo to complete the shawl.  At that time, I was 70 miles from the closest yarn store, so I used a black 8/2 rayon that I had in my stash for the weft in the second shawl.

The bamboo makes for a wonderfully drape-y fabric, which works as either a shawl or a scarf.  The black and white shawl looks a little like the head gear of Yasser Arafat, a shemagh.

Date Finished  August, 2013

Loom  Baby Wolf

Weave Structure  Huck Lace

Reed   15 epi, 10 dent reed

Warp     Fiber  bamboo

              Count  Crochet 10

              Color  White

              Mfr  Aunt Lydia's

              Source  Joann's

Warp     Width in Reed  17 1/2"

              Ends  262

              Length  5 yds

Weft  #1 - Same as warp
Weft #2   Fiber  Rayon

              Count 8/2

              Color  Black

              Mfr

              Source  Earth Guild

Beat                       50/50                     

Size  15" X 70" not counting 3" fringe

Notes

Plaited Twill Scarf

Another scarf and another new structure, plaited twill.  I love the look of this, but not sure that I like the way it wove up.  There are really two ways to weave the plaited twill.  The first requires that on some of the picks you lift up 7 shafts at a time.  That makes for a heavy lift.  The way that I wove it is physically much easier, only one shaft lifted on some of the picks.  But the downside is that the best side, is woven facing the floor.  You need to either be a contortionist to watch the cloth develop or keep a mirror handy (and still be a contortionist)  The patterning is not apparent on the top side and so of course, I found a couple of treadling errors after I completed the scarf and got it off the loom.  I guess that means another scarf for me.  Drat.

The pattern comes from Handwoven, 8 Shaft Scarves and called for a sett of 20 epi.  I increased this to 25 but I think next time with the tencel warp I will go back to 20 epi.  Plenty of red and gold tencel for another scarf, also have 8/2 in black.

Date Finished

Loom  Baby Wolf

Weave Structure Plaited Twill

Reed 10, 25 epi

Warp     Fiber  tencel

              Count 8/2

              Color  gold

              Mfr

              Source  WEBS

Warp     Width in Reed  6 1/2

              Ends  168

              Length  3 yds

Weft      Fiber tencel
              Count  8/2

              Color red and variegated red

              Mfr

              Source  WEBS

Beat                       50/50                     

Size

Notes

A Tower of Twill Towels

Weaving on 8 shafts has given me many more options for pattern and texture than what I had with just 4 shafts.  I have been in a bit of towel rut lately and wanted to see more interesting patterns than just the plain weave on a rigid heddle loom.  Handwoven's publication Top Ten Towels on 8 Shafts, gave me lots of options, but how do you pick just one.  So instead I planned a 7 yard warp to get as much variation as possible from using different treadling and different colors of weft, while using the same structure for warp.  I warped the loom with a straight twill using a natural 4/2 cotton.  Each towel utilized a different tie-up, which meant a lot of floor time changing the tie-up.  But this was a small trade-off for warping once and getting 6 very different towels.

After weaving 6 towels, I had enough warp to complete a gamp with all of the tie-ups I used, plus one extra. So if I give them all away, I will still have a reference for future weaving.

The towels came up very thick, due to the 4/2 cotton used for the warp.  I warped it at 20 epi, which seemed about the right set for a twill using this warp.

Shaded Cord

From Top Ten Towels on 8 Shafts

 Reflections

From Top Ten Towels on 8 Shafts, also found in A Weaver's Book of 8-Shaft Patterns, draft 10

 Interlocking Twill

A Weaver's Book of 8-Shaft Patterns, draft 43

Basketry

From Top Ten Towels on 8 Shafts

 Boulder Octogang Twill

A Weaver's Book of 8-Shaft Patterns, draft 321

ZigZag

A Weaver's Book of 8-Shaft Patterns, draft 314

Date Finished  July 2013

Loom  Baby Wolf

Weave Structure Twills

Reed  10, doubled 20epi

Warp     Fiber  cotton, unmercerized

              Count  4/2

              Color  natural

              Mfr  

              Source  Earthguild

Warp     Width in Reed  20"

              Ends  402

              Length  7 yds

Weft      Fiber  cotton

              Count  8/2

              Color  several

              Mfr

              Source

Beat                       50/50                     

Size  20 x 30 on the loom, 17.5 X 27 after finishing

SOUTHEAST FIBER FORUM

The Southeast Fiber Forum was held at Arrowmont School of Crafts in Gatlinburg in early April.  I attended and took a weekend class in Turned Beiderwand taught by Karen Donde of Sutherland Studios.  Karen is a great instructor, very well organized with lots of information ranging from fairly straightforward to deviously complicated on this old weaving structure.  By turning the Beiderwand structure, it can be woven with one shuttle, which makes the weaving progress much faster.

However, in weaving turned beiderwand, two different yarns are required for the warp and they are taken up differently during the weaving. The pattern warp has much   longer floats and therefore ends up looser on the warp beam.  So it is necessary to either use a second warp beam or do what most of the class did - jerry rig a secondary warp with a piece of wood pretending to be a secondary back beam and weighting the warp to  provide the tension.  This is a technique that can be used any time a supplementary warp is required.  I have read about supplementary warps for other weaving structures, but wasn't sure how to go about this without a second warp beam.


Attached are some of the other student's samples of work created during the week.  We sampled a wide variety of turned structures, including Turned Beiderwand at 1:4, 1:3, and 1:2. I was using 8/2 cotton for the ground warp and weft and a 5/2 cotton for the weft.  Most of the rest of the class was using a 10/2 yarn for the ground warp and weft.  This meant that my sample had very long warp floats, especially on the 1:4.





The other weave structures that we turned were:

• Summer and Winter
• Extended Summer and Winter
• Even Tied Overshot
• Uneven Tied Overshot
• Paired Tie Weave
• Half Dukagang

  The photo to the left is of our class assistant Dana's work.  Dana brought a borrowed Baby Wolf 8- shaft loom to class, just like my loom.  The person she borrowed it from, offered it up for sale and I bought it immediately.  I have been looking for a loom to take to Montana, so I don't have to drive one out and back on every trip. Dana used a pink supplementary warp on a green weft and not only did I get the loom, but she also left her remaining warp on the loom, which I have been weaving off with a burgundy tencel as weft using a Turned Extended Summer and Winter draft.

 It is hard to put an additional warp beam on a Baby Wolf because the back beam is not square - it comes out from the loom at an angle.  This makes it difficult to attach another back beam using clamps.  Once I got back to Brevard, Gary made a creative solution for the Baby Wolf by building a frame with a secondary back beam that slips over the original back beam leaving a space of about an inch between the two warps.  The supplementary warp can be run over this beam and weighted using water bottles and S-hooks.

ARROWMONT SCHOOL OF ARTS AND CRAFTS

I am headed to Arrowmont School of Arts and Crafts for the Southeast Fiber Forum - a three day workshop on a variety of weaving, spinning and dyeing topics.   About a year ago I took a week long workshop at John C. Campbell Folk School and I am hooked.  A workshop junkie.  I will be taking Karen Donde's class on Turned Beiderwand.  Karen's weaving studio, Sutherland Studio, is located in the River District of Asheville.

Arrowmont is located in downtown Gatlinburg and was built as one of the settlement schools in the 1920's to educate and provide work skills to theresidents of the rural Tennessee community of Gatlinburg. The craft training has continued and the original school is now a public elementary school.

Emma and Gary are coming along to spend the weekend in Gatlinburg and enjoy the Great Smokies National Park.  It's Emma's spring break and so the three of us will have an adventure in the Smokies.  We have rented a cabin about 10 miles outside of town.  They have plans for hiking, fishing, visiting the aquarium and seeing the sights of Gatlinburg.  We plan to come in the back way via Cosby to avoid Pigeon Forge and Sevierville.  We don't want Emma to see the Goofy Golf, Go Kart Tracks and all of the distractions before getting to the National Park.  Of course Gatlinburg is not free from tourist traps, but they tend to be not as big or as flashy as the ones on the highway into Gatlinburg.

The focus of the workshop is Turned Beiderwand, a very old weave structure comparable to overshot.  A Beiderwand draft typically uses a ground weft and a heavier pattern weft yarn.  This weekend we will turn the draft.  A turned draft is one that uses the weft for the warp and the warp for the weft.  Instead of using 2 shuttles for the weft, the turned structure uses only one and uses the two different yarns as warp.  Because the warp yarns are different sizes and would perform differently under tension, the turned structure uses a second warp beam.  I don't have a second warp beam on either of my looms, so we will be creating an alternate secondary warp beam using a raddle as the warp beam and water bottles as weights.

I will be using a 3 block profile which uses 8 harnesses.  The background warp is an 8/2 variegated cotton in purples and pinks and the pattern warp which will be warped on the "fake" secondary warp beam is a 5/2 white perle cotton.   I will try a variety of wefts, all 8/2 including the same variegated cotton used in the warp, and also a red, black and blue.

Snap, Crackle, Pop

I just tackled another new-to-me weave structure, crackle.  Crackle is also known as Jamtlandvaev in Swedish weaving terminology.  The American name for the weave structure comes from the pottery terminology for a type of glaze.  Some of the colors in the woven cloth just barely peak through, like the crackles on a ceramic pot. And crackle is a whole lot easy to spell and pronounce than Jamtlandvaev.

These towels were woven with a 4 block crackle using 4 colors.  In each single color warp block, there are at least 3 options for color - the warp color, the tabby weft and the pattern weft.  Crackle is similar to overshot because you weave a tabby shot and then a pattern shot.  This gives a huge variety of color options once the loom is warped.  I used 4 colors for the warp: tan, pumpkin and burgundy in 8/2 cotton and a navy blue yarn frogged from a cotton sweater.  The pattern weft floats over up to three warp ends at a time.

Researching crackle, the set up sounded complex, but it's actually easier to weave than it is to read the instructions.  It's a block weave, with the rule that at the end of each group of the same blocks, you need to add another warp thread called an "incidental".

A  is threaded: 1, 2, 3, 2
B is threaded:  2, 3, 4, 3
C is threaded: 1, 4, 3, 4
D is threaded: 1, 4, 1, 2

A = 1
B = 2
C = 3

D = 4

In one of the towels, I used the same tabby throughout.  The other three, I just selected colors randomly.  On some, I was consistent in the number of picks per block - 16 tabby and 16 pattern.  On the other towels, I mixed it up, which resulted in thick and thin rectangles in a wide variety of color combinations.  The other benefit is the front and back sides of the cloth can end up with different color variations.

The starting point for these towels came from Country Rustic Towels, Best of Handwoven, A Dozen Projects Using 8/2 Cotton.

Date Finished  March 2013

Loom  Baby Wolf

Weave Structure  Crackle

Reed  12, 16 epi

Warp     Fiber  cotton

              Count  mostly 8/2

              Color tan, burgundy, pumpkin, navy

              Mfr  Dragon Tail

              Source  Earth Guild

Warp     Width in Reed  22 in

              Ends  354

              Length  4 yds

Weft      Same

Beat        More   Weft Faced        

Size  Finished 19 x 24

Notes  - These towels are wider than a typical dish towel.  Next time, I'll narrow the warp.  Ended up with 3 towels and a small handtowel.